How much does StablePump charge to trade?

StablePump charges 1.25% on bonding-curve trades, split as 0.95% to the protocol and 0.30% to the coin's creator. All of it is denominated in gUSDT, Stable Mainnet's USD-pegged gas token. This matches pump.fun's 1.25% and is lower than DyorSwap's 1.5% trade fee.

What is the StablePump graduation fee?

Graduation on StablePump costs a flat toll of roughly 2 gUSDT, not a percentage of liquidity. This is the key difference from DyorSwap, which takes a 10% skim of migrating liquidity. A flat toll means a token keeps essentially all of the 20,000 gUSDT it raised when it lands on the AMM.

Do creators earn fees on StablePump?

Yes. Of StablePump's 1.25% trade fee, 0.30% routes to the coin's creator on every buy and sell, paid in gUSDT. This built-in creator revenue share is unusual among launchpads, where the trading fee typically goes entirely to the platform. The other 0.95% funds the protocol.

Is StablePump cheaper than pump.fun and DyorSwap?

StablePump matches pump.fun's 1.25% trade fee — it is not cheaper there — but it is lower than DyorSwap's 1.5%. The bigger saving is at graduation: StablePump's flat ~2 gUSDT toll replaces DyorSwap's 10% liquidity skim, which is where most of the cost difference comes from.

Are StablePump fees paid in gUSDT?

Yes. The 1.25% trade fee, the 0.30% creator share, and the flat ~2 gUSDT graduation toll are all denominated in gUSDT, Stable Mainnet's USD-pegged gas token (renamed USDT0 under Stable v1.2.0). USD pricing keeps fee costs predictable instead of tied to a volatile gas coin.

What is the fee after a token graduates?

Once a StablePump token graduates to the AMM, it trades at a low AMM swap fee like any standard pool, and liquidity providers earn that fee. The 1.25% curve trade fee and creator share apply only while the token is on the bonding curve, before it reaches the 20,000 gUSDT graduation threshold.

StablePump Fees Explained: 1.25% Trade Fee, a Flat Graduation Toll, and a Creator Share

By Marcus Cole, Memecoin Market Strategist · Last Updated: July 2026

Disclosure: StablePump is a fair-launch launchpad on Stable Mainnet. This comparison discloses our own position and cites competitor fees as published.

What Are StablePump's Fees?

StablePump charges a 1.25% fee on bonding-curve trades, split as 0.95% to the protocol and 0.30% to the coin's creator, plus a flat graduation toll of roughly 2 gUSDT when a token migrates to the AMM. StablePump, a fair-launch bonding-curve memecoin launchpad on Stable Mainnet (chainId 988), denominates every fee in gUSDT (Stable's USD-pegged gas token, renamed USDT0 under Stable v1.2.0). After graduation, tokens trade on the AMM at a low swap fee like any standard pool.

The headline is not that StablePump is the cheapest launchpad in every column — it is that StablePump replaces a percentage graduation skim with a flat toll and pays creators a cut of every trade. Below is the exact breakdown, plus an honest side-by-side with pump.fun and DyorSwap.

StablePump Fees at a Glance

StablePump fee structure (all amounts in gUSDT / USDT0)
Fee	Amount	Who receives it
Bonding-curve trade fee	1.25% total	0.95% protocol + 0.30% coin creator
Graduation toll	Flat ~2 gUSDT	Protocol (fixed, not a percentage)
Post-graduation AMM swap	Low AMM swap fee	AMM liquidity (standard pool)

Every StablePump token launches with a fixed supply of 1,000,000,000 tokens and graduates to the AMM once its curve reaches 20,000 gUSDT. Because the graduation cost is a flat toll rather than a share of liquidity, the bigger a token gets, the smaller that cost is in relative terms.

The 1.25% Bonding-Curve Trade Fee (0.95% Protocol + 0.30% Creator)

StablePump takes 1.25% on each bonding-curve buy or sell, and 0.30 of those percentage points route to the person who created the coin. That built-in creator revenue share is unusual: on most launchpads, 100% of the trading fee goes to the platform, and creators only earn if they hold and sell their own supply. On StablePump a creator keeps earning gUSDT on every trade their community makes, win or lose.

The remaining 0.95% funds the protocol that runs the curve, the King of the Hill discovery slot, and graduation. All of it is charged in gUSDT, so a creator's 0.30% accrues in a stable dollar unit rather than a coin whose price could fall before they withdraw.

The Flat Graduation Toll (Not a Percentage Skim)

StablePump charges a flat toll of roughly 2 gUSDT at graduation instead of skimming a percentage of the migrating liquidity. This is the model's most defensible advantage over DyorSwap, the other Stable-chain launchpad, which takes a 10% skim of liquidity at migration. A flat toll means a token that raises 20,000 gUSDT keeps essentially all of that liquidity when it lands on the AMM, rather than surrendering a four-figure slice of it.

The gap widens as tokens grow. A 10% skim scales with size, so a larger raise loses proportionally more; a flat ~2 gUSDT toll costs the same whether a token graduates once or a hundred tokens graduate. According to DyorSwap's published launchpad terms (2025), the 10% graduation skim is deducted from liquidity at migration — the cost StablePump's flat toll is designed to eliminate.

The Post-Graduation AMM Fee

After a token graduates, it trades on StablePump's on-chain AMM at a low swap fee, the same way any standard automated market maker pool charges a small percentage per trade. The bonding-curve trade fee and creator share apply only while the token is on the curve; once it graduates, ordinary AMM swap economics take over and liquidity providers earn the swap fee. This is the phase where projects typically turn to sustained volume support such as OpenLiquid to keep their graduated market active.

StablePump Fees vs pump.fun vs DyorSwap in 2026

Across the three launchpads, StablePump and pump.fun both charge 1.25% on trades, while DyorSwap charges 1.5%; the real separation is at graduation, where StablePump's flat toll replaces DyorSwap's 10% skim. StablePump is not cheaper than pump.fun on trade fees — they match — but it is lower than DyorSwap on trades and dramatically cheaper than DyorSwap at graduation.

Launchpad fee comparison, 2026
Fee	StablePump	pump.fun	DyorSwap
Trade fee (on curve)	1.25% (0.95% + 0.30% creator)	1.25%	1.5%
Graduation cost	Flat toll (~2 gUSDT)	~flat	10% skim
Creator revenue share	0.30% of every trade	Limited / varies	None built in
Trade currency	gUSDT (USD-pegged)	SOL (volatile)	Native token
Chain	Stable Mainnet (988)	Solana	Stable / EVM

Bottom line: If you want USD-denominated pricing, a built-in creator cut, and to avoid a percentage graduation skim, StablePump fits — especially versus DyorSwap. If you specifically want Solana liquidity and SOL exposure, pump.fun remains the incumbent at the same 1.25% trade fee. According to pump.fun's published fee schedule (2025), its trading fee is 1.25%, which is why StablePump never claims to undercut pump.fun on trades.

What StablePump's Fee Model Means for Launchers and Traders

For launchers, the model turns a coin into an ongoing income stream: the 0.30% creator share pays out in gUSDT on every trade, and a flat graduation toll means the liquidity a community builds stays in the market instead of being skimmed. For traders, USD-pegged fees are predictable — a 1.25% fee on a gUSDT trade costs the same dollar amount today and next week, unlike a percentage of a volatile gas coin.

According to Dune Analytics dashboards tracking pump.fun (2025), fewer than 2% of launched tokens ever graduate, so most fee activity happens on the curve. That makes the on-curve economics — the 1.25% split and the creator share — the numbers that matter most for the typical StablePump coin, and the flat toll the deciding factor for the minority that graduate.

Frequently Asked Questions

How much does StablePump charge to trade?: StablePump charges 1.25% on bonding-curve trades, split as 0.95% to the protocol and 0.30% to the coin's creator. All of it is denominated in gUSDT, Stable Mainnet's USD-pegged gas token. This matches pump.fun's 1.25% and is lower than DyorSwap's 1.5% trade fee.
What is the StablePump graduation fee?: Graduation on StablePump costs a flat toll of roughly 2 gUSDT, not a percentage of liquidity. This is the key difference from DyorSwap, which takes a 10% skim of migrating liquidity. A flat toll means a token keeps essentially all of the 20,000 gUSDT it raised when it lands on the AMM.
Do creators earn fees on StablePump?: Yes. Of StablePump's 1.25% trade fee, 0.30% routes to the coin's creator on every buy and sell, paid in gUSDT. This built-in creator revenue share is unusual among launchpads, where the trading fee typically goes entirely to the platform. The other 0.95% funds the protocol.
Is StablePump cheaper than pump.fun and DyorSwap?: StablePump matches pump.fun's 1.25% trade fee — it is not cheaper there — but it is lower than DyorSwap's 1.5%. The bigger saving is at graduation: StablePump's flat ~2 gUSDT toll replaces DyorSwap's 10% liquidity skim, which is where most of the cost difference comes from.
Are StablePump fees paid in gUSDT?: Yes. The 1.25% trade fee, the 0.30% creator share, and the flat ~2 gUSDT graduation toll are all denominated in gUSDT, Stable Mainnet's USD-pegged gas token (renamed USDT0 under Stable v1.2.0). USD pricing keeps fee costs predictable instead of tied to a volatile gas coin.
What is the fee after a token graduates?: Once a StablePump token graduates to the AMM, it trades at a low AMM swap fee like any standard pool, and liquidity providers earn that fee. The 1.25% curve trade fee and creator share apply only while the token is on the bonding curve, before it reaches the 20,000 gUSDT graduation threshold.